Glue and Grout (Light duty)

Grey or white cement-based adhesive, classified as an adhesive for indoor use according to Standard UNE-EN
12004.

APPLICATIONS
Tiling indoor floors and finishes using ceramic tiles of medium/high porosity (> 3%). A double glue technique should be used for tiles larger than 30 cm x 30 cm

APPLICATION SURFACES

Conventional surfaces and cement-based mortar floors and walls. The application surface must be hard, perfectly set and free from dust, paint, oil, etc.

WARNINGS AND RECOMMENDATIONS

• For plaster surfaces, use aplicaCer Plaster Special.
• For formats larger than 40 x 40 cm, we recommend using aplicaCer Outdoor.
•Do not apply this product when frost is forecasted.
•Do not apply at temperatures below 5°C or above 35°C.
• Do not apply in areas where there is a risk of standing water.
• In extreme weather conditions (wind or high temperatures), the product will dry more quickly than usual. This will result in a shorter open time.
• In high temperatures, windy conditions or if the application surface is very absorbent, it is advisable to moisten the surface and wait for the film of water to disappear before applying the product.
• Check, periodically, that a surface film has not formed on the adhesive paste once it has been spread onto the surface. If a film has formed, remove the product and apply a fresh coat.
• Check that the paste is sticky enough by periodically lifting one of the tiles already in place to ensure that it
is well stuck down.
• Use within 1 year of date of packaging. Store the product in its original packaging in a dry, covered
place protected from humidity