Glue and Grout (Heavy Duty )

Cement-based adhesive, classified as C2TE S1 according to Standard EN 12004, and as S1 according to Standard
UNE-EN 12002. Developed by aplica® for the laying of low absorption ceramic and porcelain tiles. Adhesive made up of hydraulic bonding materials which give it a high bond strength, and chemical bonding materials which increase shear adhesive strength considerably. Excellent wetting ability and reduced slip for a guaranteed perfect finish.

APPLICATIONS
Tiling indoor and outdoor floors and renderings using any type of ceramic tile. Tiling plasterboard with porcelain tiles. Perfect for indoor and outdoor porcelain tiles. Floors with underfloor heating. A double glue technique should be used for tiles larger than 40 cm x 40 cm

APPLICATION SURFACES

Conventional surfaces and cement-based mortar floors and walls. The application surface must be hard, perfectly set and free from dust, paint, oil, etc.

WARNINGS AND RECOMMENDATIONS

• Do not exceed heights of 2 m on outdoor renderings.
• For plaster surfaces, use aplicaCer Plaster Special or aplicaCer Extra Thick-Set. Avoid applying on dead plaster or weak renderings.
• Do not apply when frost or rain are forecasted, or at temperatures below 5 ºC or above 35 ºC.
• In extreme weather conditions (wind or high temperatures), the product will dry more quickly than usual. This will result in a shorter open time.
• In high temperatures, windy conditions or if the application surface is very absorbent, it is advisable to moisten the surface and wait for the film of water to disappear before applying the product.
• Check, periodically, that a surface film has not formed on the adhesive paste once it has been spread onto
the surface. If a film has formed, remove the product and apply a fresh coat.
• Check that the paste is sticky enough by periodically lifting one of the tiles already in place to ensure that it
is well stuck down.
• Use within 1 year of date of packaging. Store the product in its original packaging in a dry, covered
place protected from humidity.